Lyon DD2550A Laminated Hardwood Top Adjustable Legs Work Bench with Stringer and Shelf, 60" Width x 28" Depth x 36-1/4" Height, Dove Gray

Lyon DD2550A Laminated Hardwood Top Adjustable Legs Work Bench with Stringer and Shelf, 60" Width x 28" Depth x 36-1/4" Height, Dove Gray Review

Lyon DD2550A Laminated Hardwood Top Adjustable Legs Work Bench with Stringer and Shelf, 60" Width x 28" Depth x 36-1/4" Height, Dove Gray Feature

• Sturdy steel channel legs adjust top from 27-1/4" to 36-1/4" high; provide firm support for top selections
• Welded steel cross members add strength and durability
• Optional leg levelers afford easy adaption to uneven flooring for stability
• Electrical knockouts on each leg offer space for duplex outlet boxes (not included) and subsequent electrical hookup
• Available in Dove Gray color

Material shall be the best quality, cold rolled, mild annealed, sheet steel free from buckle, loose scale or other surface imperfections. Finish shall be baked on at a temperature not less than 300 degrees F and must withstand rigid hammer test without flaking. Top and bottom horizontal leg channels to be 14 gauge spotwelded at two locations on each side of the vertical leg channels. Shelves shall be 16 gauge steel x 13-1/4" depth, punched for bolting to rear of leg and to the bottom cross channel. Top of shelf to be 1-1/2" above bottom cross channel. Back and End Stops shall be 14 gauge steel. Back stops extend 3" above top and are secured by bolting to top. End stops taper 3" at back to 1-1/2" at front. Corners are rounded to avoid any sharp points. Stringer shall not be less than 18 gauge steel, channel type, not less than 5" wide, and punched for attachment to rear legs to insure rigidity. The adjustable foot is a channel made of 14 gauge steel and out of one continuous piece. The channel is punched with 12 holes on 1" increments for adjustment purposes. The bottom of the channel is formed and punched to add a leveling foot if desired by means of nut and bolt. Overall height of channel is 12-1/2" high. The channel is inserted into the bottom of the workbench leg and secured with nuts and bolts. Adjustability is performed by loosening nuts and bolts and repositioning to desired hole location on 1" centers. 1-3/4" Thick super comp top with comfort edge.