Lyon DD2521A Plastic Laminate Top Adjustable Legs Work Bench with Stringer and Perfect Fit Drawer, 72" Width x 34" Depth x 36-1/4" Height, Dove Gray

Lyon DD2521A Plastic Laminate Top Adjustable Legs Work Bench with Stringer and Perfect Fit Drawer, 72" Width x 34" Depth x 36-1/4" Height, Dove Gray Review

Lyon DD2521A Plastic Laminate Top Adjustable Legs Work Bench with Stringer and Perfect Fit Drawer, 72" Width x 34" Depth x 36-1/4" Height, Dove Gray Feature

• Sturdy steel channel legs, adjust top from 27-1/4" to 36-1/4" height, provide firm support for top selections listed below
• Welded steel cross members add strength and durability
• Optional leg levelers afford easy adaption to uneven flooring for stability
• Electrical knockouts on each leg offer space for duplex outlet boxes and subsequent electrical hookup
• Available in Dove Gray color

Material shall be the best quality, cold rolled, mild annealed, sheet steel free from buckle, loose scale or other surface imperfections. All steel parts shall be thoroughly cleaned before finish is applied. Finish shall be baked on at a temperature not less than 300 degree fahrenheit and must withstand rigid hammer test without flaking. Tops shall be 12 guage steel, flanged down 1-3/4", and back 2", and punched for attachment to bench legs. Tops shall have attachment angles of 14 gauge steel, one each end of bench, thereby closing spaces at ends between top and bench legs. Legs shall be 14 gauge steel. Top and bottom horizontal leg channels to be 14 gauge spotwelded at two locations on each side of the vertical leg channels. Back and end stops shall be 14 gauge steel. Back stops extend 3" above top and are secured by bolting to top. End stops taper 3" at back to 1-1/2" at front. Corners are rounded to avoid any sharp points. Stringer shall not be less than 18 gauge steel, channel type, not less than 5" wide, and punched for attachment to rear legs to insure rigidity. The adjustable foot is a channel made of 14 gauge steel and out of one continuous piece. The channel is punched with 12 holes on 1" increments for adjustment purposes. The bottom of the channel is formed and punched to add a leveling foot if desired by means of nut and bolt. Overall height of channel is 12-1/2" high. The channel is inserted into the bottom of the workbench leg and secured with nuts and bolts. Adjustability is performed by loosening nuts and bolts and repositioning to desired hole location on 1" centers. 27-1/4" to 36-1/4" adjustable height. 1-7/8" Thick pressed wood over steel top. 1-3/4" Bench top thickness. Available in Dove Gray color. Bench measures 60" width by 28" depth by 36-1/4" height.